Why should you select ADARSH pressure gauges for projects, process industries, on machineries, etc. ?
Know the reasons below
Our Pressure Gauges are certified for Marine & Navy Applications by SQAE Mumbai & IDEMI Mumbai
'ADARSH' pressure gauges passed the following tests successfully in just one attempt a feat no other manufacturer in India as attained yet (as told by the the test supervisors).
Shock test (Free Fall Method) :
Drop height 600mm, Gauge Mounting at - a) 6 O' Clock b) 3 O' Clock c) 0 O' Clock & with dial facing upward, Nos. of Drop- One each in the above position
Results: No Visual Mechanical Damage Observed
Vibration Endurance Test by Sweep
Frequency: 5-60-5 hz, Amplitude: 1.5g constant acceleration, Sweep rate: 10ct/min, Duration: 2hrs in each axis
Results: No Visual Mechanical Damage Observed
The sample gauge was ket in dust chamber, talcum powder was maintained in suspension by air current. The sample was connected to a vacuum of 200mm of water column for two hours.
Results: At the end of the test the gauge was checked for dust penetration, the gauge complied this test successfully.
Protection against Water Jet
The gauge was washed by water at 1kg/cm2 by a nozzle from all direction at a distance of 3 meters.
Results: At the end of the test the gauge was checked for water penetration, the gauge complied this test successfully.
Endurance calibration test
Pressure Fluctuation of about 50% of the pressure range was generated and the same was applied alternately between 25% and 75% of the instrument scale at a frequency about 60 cycles per minute. The Endurance Test was run for about 300 hours on non-continuous basis till completion of 10,80,000 cycles of operation.
Result- After completion of test the accuracy of the gauge was checked and change in maximum accuracy after this test was found to be 0.028% of span.
